The 5016 Series IDC Socket Connectors were designed to meet the requirements of SFF-8059 for use on SFF-8049 cable assemblies. Our products have been extensively tested and are in conformance with the listed specifications. The primary application for these cables is to connect ATA hard disk drives to the motherboard. In addition, these have been used where noise reduction or cross talk is a concern. Many applications may benefit from the G-S-G arrangement of the connectors and cables.

FEATURES:

Material:
Insulator: Thermoplastic Polyester (PBT), 30% Glass Fiber Reinforced, U.L. Rated 94V-0
Color: See Part Number Description
Cover and Strain Relief: Thermoplastic Polyester (PBT), 30% Glass Fiber Reinforced, U.L. Rated 94V-0
Color : Black
Contacts and Ground Plane: Phosphor Bronze

Plating:
Contacts: Selectively plated gold on mating area (see part number description), and 100µ" minimum tin/lead
on IDC termination area, all over 50µ" minimum nickel underplate.
Ground Plane: 100µ" minimum tin/lead on IDC termination area, all over 50µ" minimum nickel underplate.

Performance Specifications:
Current Rating: 1 amp per contact
Contact Resistance: 20 milliohms maximum (initial)
10 milliohms maximum increase (during life)
Dielectric Withstanding Voltage: 600 VAC RMS
Insulation Resistance: 5000 megohms minimum.
Temperature Rating: -55°C to +105°C
Insertion Force: 10oz. (199g) maximum (per contact)
Separation Force: 1oz (28.4g) minimum (per contact)

This connector accepts 30 AWG ribbon cable (6645 Series) on .025 pitch.

Pin #20 is blocked on all connectors per specification.
Pin #34 on "System Board" connector is connected to ground only. Pin #28 on "Device 1" connector(grey) is removed.